Product Description

DESCRIPTIONS

10 pair Krone LSA Plus disconnection module (TP-1201-10) is used throughout the distribution level, in the main distribution frames (MDF), in the cross connection cabinets (CCC) or in the distribution point (DP) boxes. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.

 

It adopts IDC (Insulation Displacement Connection) technique, which means no soldering, wire-stripping or the use of screws, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity. Contacts that ensure the highest degree of reliability even under the most adverse environmental and climatic conditions. A completely reliable, gas-tight connection between the contact and conductor.

 

10 pairs LSA disconnection modules use a normally closed two piece contact, with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test cord can be inserted into a pair to test each side of the circuit independently. This greatly accelerates fault identification. The center contact point can also be used for overvoltage or current protection.

 

 

MAIN FEATURES

• Insulation Displacement Connection
• No wire-stripping, screw and solder free
• Reliable connections
• Clear labeling
• Modular design and installations
• Gas tight connection
• One push wire insertion
• Robust long-term environmental stability
• Flexible indoor and outdoor use

 

 

TECHNICAL PARAMETERS

General
Storage Temperature:	-40°C ~ +80°C
Operating Temperature:	-20°C~+60°C
Relative Humidity:	≤93% non-condensing
Apperance	Uniform color, W/O crusting and cracks
Materials
Plastic:	Thermoplastic ABS
Flame Retardant:	Not Flame-retardant or UL 94V-0
Contact:	Special brass
Coating:	0.5μm silver or nickel plating
Specifications
Insulation Resistance:	> 50 GΩ @ 500 V
Dielectric Strength:	> 2000Vrms
Contact Resistance:	1 mΩ (Typical)
Conductor Diameter:	0.4mm-0.8mm
Insulation Diameter:	0.7mm-1.60mm
Gas Tight Performance:	> 50% @ Each side
Pulling Strength:	> 25N @ Vertical side
Life Cycles:	> 200 Times

 

* For more products, pls visit our website: www.taepo.com

ORDER DATA

Item No	Descriptions
TP-1201-10	10 pairs LSA disconnection module

Price Terms︰ EXW / FOB NINGBO

Payment Terms︰ TT / LC / West Union / Paypal

Packing︰ 10pcs/box, 25boxes/ctn, 59*27*24cm/ctn, gw 13kg/ctn

Lead Time︰ 2-4 weeks

Product Image